HomeResearch & Knowledgeback to Homeback to Research & KnowledgeRyanair strategic positioning (B): Always getting betterback to

Case Study

Ryanair strategic positioning (B): Always getting better

By Seán Meehan

13 pages

March 2017

Order this case study

Reference: IMD-7-1873

By 2013, after over near 30 years, Ryanair has become the largest airline in Europe in terms of passengers flown internationally. It outperformed its low cost rivals on most operational dimensions. It was unambiguously positioned as the lowest cost of the low cost airlines. Its success, however, came at a price. Ryanair was far from loved. Its operational model, which enabled such low cost flying, had as a side effect service that was seen as far below industry norms. In 2013 its outspoken CEO, Michael O’Leary, came under increasing pressure to tone down the macho image he had cultivated and enhance service levels. To do this he would need to adapt the successful operational model. The A case asks whether such an adaptation make sense. The B case documents the evolution and implementation of Ryanair’s response, a change program called “ALWAYS GETTING BETTER” (AGB). AGB encompasses a digitalization program that chief marketing officer Kenny Jacobs believes can enable Ryanair to become the “Amazon of Travel in Europe.” The B case asks whether this is a realistic ambition.

Learning Objective

Understanding customer centricity
Understanding strategic alignment
Understanding whether and how successful incumbents can embrace change.
Understanding how incumbents can best embrace digitalization

Keywords

Marketing, Operations, Positioning, Transformation, Customer Centricity, Disruption, Strategic Innovation, Innovation

Settings

Europe, Republic of Ireland
Ryanair, Travel and Leisure, Airlines and Aviation
2013–2016

Type

Field Research

Available Languages

English

Related material

Teaching note, Video

IMD case studies are distributed through case clearing houses. In order to browse the collection and purchase copies please visit the links below.

The Case Centre

Cranfield University

Wharley End Beds MK43 0JR, UK
Tel +44 (0)1234 750903
Email [email protected]

Harvard Business School Publishing

60 Harvard Way, Boston MA 02163, USA
Tel (800) 545-7685 Tel (617)-783-7600
Fax (617) 783-7666
Email [email protected]

Asia Pacific Case Center

NUCB Business School

1-3-1 Nishiki Naka
Nagoya Aichi, Japan 460-0003
Tel +81 52 20 38 111
Email [email protected]

IMD retains all proprietary interests in its case studies and notes. Without prior written permission, IMD cases and notes may not be reproduced, used, translated, included in books or other publications, distributed in any form or by any means, stored in a database or in other retrieval systems. For additional copyright information related to case studies, please contact Case Services.

Contact

Research Information & Knowledge Hub for additional information on IMD publications

This case study is part of a series

Ryanair strategic positioning (A): July 2013
Ryanair strategic positioning (B): Always getting better

This case study is part of a series

Ryanair strategic positioning (A): July 2013
Ryanair strategic positioning (B): Always getting better

Keep reading

Article

So, what are these AI skills? - Frederik Anseel

AI is reshaping careers, but future-proof skills aren’t what you think. Vision, expertise, and deep knowledge - not hype - are key to success in an AI world.

Artificial Intelligence Decision Making Innovation Technology Management

By Frederik Anseel

in I by IMD

Podcast

How does sustainable leadership work?

This episode takes you behind the scenes of a recent gathering led by the World Business Council for Sustainable Development together with IMD, where David Bach sat down with two sustainability leaders.

Leadership Sustainability

By David Bach and Felix Zeltner

in I by IMD

Article

Repairing reputational damage: don’t go the way of Boeing

All organizations should have a plan to secure trust during, after (and even before) a crisis hits. Here are a host of examples, good and bad, to learn from.

Leadership Resilience Strategy

By Michael Skapinker

in I by IMD

Article

Surviving Global Tariffs - Industry Reactions

Surviving Global Tariffs means Medtech and Luxury brands must revisit 1990s strategies to adapt to the US’s steepest trade barriers in decades.

Supply Chain

By Carlos Cordon, Salvatore Cantale and Toni Yañez

in I by IMD

Case Study

The price of innovation: Will Medacta compromise its DNA by embracing robotics?

Strategy Innovation

By Carlos Cordon, Antonio Di Brino, Jesper Fibiger, Frank Kristensen, Soniya Soniya and Alison End Fineberg

Case Study

Aluminium Cyclo Enterprises Malaysia: How to manage a supply chain disruption?

Marketing

By Dominique Turpin, Anamaya Narain Singh, Cyril Darlong Diengdoh and Sandeep Puri

Article

7 Ways to Restore Morale and Boost Performance at Work

Tired teams, wasted weekends, and unread reports—here are 7 ways to restore morale and reignite performance. Avoid unnecessary reporting and non-essential tasks.

Leadership Talent Management

By Knut Haanaes

in I by IMD

So, what are these AI skills? - Frederik Anseel

By Frederik Anseel
in I by IMD

Summary

AI is reshaping careers, but future-proof skills aren’t what you think. Vision, expertise, and deep knowledge - not hype - are key to success in an AI world.

Contact

Research Information & Knowledge Hub for additional information on IMD publications

Related topics

Artificial Intelligence

Decision Making

Innovation

Technology Management

Browse all topics

Repairing reputational damage: don’t go the way of Boeing

By Michael Skapinker
in I by IMD

Summary

All organizations should have a plan to secure trust during, after (and even before) a crisis hits. Here are a host of examples, good and bad, to learn from.

Contact

Research Information & Knowledge Hub for additional information on IMD publications

Related topics

Leadership

Resilience

Strategy

Browse all topics

The price of innovation: Will Medacta compromise its DNA by embracing robotics?

By Carlos Cordon Antonio Di Brino Jesper Fibiger Frank Kristensen Soniya Soniya and Alison End Fineberg
Case reference: IMD-2663 ©2025

Summary

Medacta Group SA is a rising star in the orthopedics market, achieving global success through innovative products and techniques, with a particular emphasis on minimally invasive techniques that bring meaningful value to its patients. With its approaches such as Anterior Minimally Invasive Surgery (AMIS) for hip replacement and Kinematic Alignment for knees, Medacta offers high-quality techniques, supporting tools and cutting-edge implants. It also offers personalized surgeon education through the Medacta Orthopedic Research and Education (M.O.R.E.) Institute. Medacta is situated in an evolving landscape, with competitors including Stryker and Zimmer Biomet investing heavily in robotic technologies. Technological advances are being made in data-driven planning tools – including augmented reality – and research institutes are looking for the most advanced solutions as demanded by many hospitals and surgeons. Despite these trends in the industry, Medacta's CEO, Francesco Siccardi has concerns regarding the value of existing robotic systems, noting their lack of proven benefits in patient outcomes or cost reductions, especially in a context of increasing emphasis on value-based care and sustainability. The case explores the opportunities and challenges confronting Medacta as they decide whether to enter the orthopedic robotics market. The company wants to continue to differentiate itself and drive growth in line with its foundational principles of patient care, operational excellence and sustainable innovation. Today, Francesco faces a critical decision around whether now is the time to enter the robotics market and, if so, how Medacta should do so to preserve its culture and stay true to its DNA.

Reference IMD-2663

Organization Medacta Group

Industry Healthcare, Medical Device

Available Languages English

Contact

Research Information & Knowledge Hub for additional information on IMD publications

Related topics

Strategy

Innovation

Browse all topics

Aluminium Cyclo Enterprises Malaysia: How to manage a supply chain disruption?

By Dominique Turpin Anamaya Narain Singh Cyril Darlong Diengdoh and Sandeep Puri
Case reference: IMD-2665 ©2025

Summary

In 2024, the management of Aluminium Cyclo Enterprises (ACE), was concerned that the European Union (EU) export rules for ferrous and non-ferrous scrap were becoming more restrictive. Not just the EU, but close to 43 countries had restricted the export of ferrous scrap. The overall secondary aluminum industry in Malaysia was very dependent on imports and ACE relied heavily on imported scrap. The supply and pricing of raw materials could be volatile due to factors beyond the company’s control, such as global demand and supply, economic and political conditions, tariff disputes, competition, import duties, tariffs and currency exchange rates. These factors exposed the company to major price and currency fluctuation risks. ACE was heavily reliant on the automotive sector for its business. In such circumstances, should ACE consider opening plants in international markets where scrap was readily available? What should the company’s business continuity and growth strategy be in Malaysia?

Reference IMD-2665

Industry Manufacturing, Metal Products

Available Languages English

Contact

Research Information & Knowledge Hub for additional information on IMD publications

Related topics

Marketing

Browse all topics